MTN6300-0002 Presence Detector Group Management Schneide KNX Bus Compatible Remote Control

MTN6300-0002 Schneider KNX Bus Compatible Remote Control for Presence Detector Group Management

Core Parameters

1. Protocol Compatibility: Exclusively compatible with Schneider KNX bus protocol, seamlessly connected to KNX series presence/motion detectors, supporting two-way signal transmission with detectors. It can realize grouped management of multiple detectors on the same bus and is incompatible with non-KNX protocol detection equipment.
2. Core Control: Supports remote adjustment of detector sensitivity and detection range threshold; enables switching of detector working modes (continuous detection/energy saving/timed sleep), setting of alarm thresholds and one-click fault reset. It also supports batch parameter modification of single/multiple detectors to improve operation and maintenance efficiency.
3. Operation & Power Supply: Key-type design with backlit LCD screen, clearly displaying detector working status, parameter values and grouping information; powered by 3V button battery with low power consumption solution, the single battery life is ≥2 years, with low battery power alarm prompt function.
4. Transmission & Protection: Wireless RF signal transmission, the effective control distance is ≤30m without obstruction, and the effective through-wall transmission distance is ≤10m with strong anti-environmental interference ability; IP30 protection rating, resistant to slight collision and dust erosion, operating temperature 0℃~40℃, suitable for various indoor environments.
5. Appearance & Craftsmanship: Lightweight plastic shell with ergonomic design for comfortable grip and clear key touch; compact size, supporting handheld/wall-mounted simple installation, with magnetic base for flexible placement in equipment rooms and central control rooms. The industrial matte texture is suitable for building automation scenarios.

Application Scenarios

1. Commercial Office Buildings: Adapted to ceiling-mounted KNX presence detectors in office areas, operation and maintenance personnel can remotely adjust the detection sensitivity to avoid false start/stop of lights/air conditioners caused by slight human movement. At the same time, set the energy-saving sleep mode for open office areas to reduce regional energy consumption.
2. Commercial Complexes/Shopping Malls: Realize grouped management of KNX detectors in mall corridors, escalator entrances and leisure areas, and remotely switch detection modes according to passenger flow changes. High-sensitivity monitoring during peak hours and energy-saving sleep during off-peak hours realize intelligent on-demand start and stop control.
3. Star-rated Hotels/High-end Apartments: Remotely debug parameters of KNX presence detectors in guest rooms and public restrooms to avoid false triggering of equipment when guests check in; detectors can be reset directly through the remote control in case of failure without on-site disassembly, greatly improving the operation and maintenance response efficiency of hotels.
4. Hospitals/Schools/Libraries: Adapted to KNX detectors in consulting rooms, classrooms and reading areas, remotely set the detection range and alarm threshold to balance personnel activity monitoring and intelligent linkage of lighting/fresh air equipment; remote control operation without touching the detector meets the sterile requirements of hospitals and convenient use needs of schools.
5. Industrial Parks/R&D Buildings: Realize centralized remote management of KNX detectors in factory corridors, R&D areas and staff lounges, maintain full-time high-sensitivity monitoring during production peak hours, and switch to energy-saving mode during non-production hours. The lightweight design is suitable for the mobile operation needs of factory operation and maintenance personnel.

Schneide KNX remote control

MTN6300-0002

MTN6300-0002 Presence Detector Group Management Schneide KNX Bus Compatible Remote Control Images